SoyThane Urethane Spray Foam Technical Data
SoyThane Urethane Description
SprayMax SoyThane is a unique Foam made from Aliphatic Amines and regrowable energy. Soythane when spray applied forms high density skins and lower density cores. This yields high strength to weight ratios. Soythane being closed cell exhibits excellent water proof characteristics. Soythane is water blown and has no refrigerant blowing agents.
Processing Equipment
Soythane is applied as a 1 – 1 ratio through the SprayMax “FastKick” plural component gun/proportioner.Safety and Handling
Soythane is free of VOC’s. See SprayMax MSDS for proper handling of application.
| Typical Physical Properties | ||||
| Soythane Physical Properties | Test Method | Soythane 1.5 | Soythane 3 | Soythane .6 |
| Density | ASTM D-1622 | 1.5 PCF* | 3.0 PCF* | .6 PCF* |
| R-Factor | ASTM C518 | 6.285 | 6.361 | 4.414 |
| Compressive Strength | ASTM D-1261 | 10 PSI** | 105 PSI** | 5 PSI** |
| Tensile Strength | ASTM D-638 | 65 | 125 | 32 |
|
Dimensional Stability @ 158 F 97% RH - Two Weeks |
< 1% | < 1% | < 1% | |
| Water Absorbtion | ASTM D-2842 | < 1% | < 0.5% | < 1.5% |
| Water Vapor Transmission | ASTM C-355 | 0.5 Perms | 0.5 Perms | 0.5 Perms |
| * PCF = Pound-Force Per Cubic Inch | ** PSI = Pounds Per Square Inch |
espanol
| Típico Propiedades Físicas | ||||||
| Soythane Propiedades Físicas | Método de Ensayo | Soythane 1.5 | Soythane 3 | Soythane .6 | ||
| Densidad | ASTM D-1622 | 1.5 PCF* | 3.0 PCF* | .6 PCF* | ||
| R-Factor | ASTM C518 | 6.285 | 6.361 | 4.14 | ||
| Resistencia a la Compresión | ASTM D-1261 | 10 PSI** | 105 PSI** | 5 PSI** | ||
| Resistencia a la Tracción | ASTM D-638 | 65 | 125 | 32 | ||
|
Estabilidad dimensional @ 158 F 97% RH - Two Weeks 158 F @ 97% RH - Dos Semanas |
< 1% | < 1% | < 1% | |||
| Absorción de Agua | ASTM D-2842 | < 1% | < 0.5% | < 1.5% | ||
| El Vapor de Agua de Transmisión | ASTM C-355 | 0.5 Perms | 0.5 Perms | 0.5 Perms | ||
|
||||||