Prices
This package includes a unique combination Spray Gun/Proportioner that can be used over and over again. The Dual Cartridges are disposable, no solvents, Voc's or compressed cylinders to worry about disposing of.
This Foam Spray Urethane Foam is Hydrophobic. Hydrophobic is the Lotus Principle where water beads with no entry. Most Foams are Hydrophilic.
This, like any other Foam System passes a E-84 Fire Rated Test when (as all foams do) has a proper Thermal Barrier.
Package 1 Includes:
 |
1 "FastKick" Plural Component dispensing gun |
 |
10 cases of SprayMax Soythane 1.5lb density Closed Cell spray surface foam. |
Package Cost: $2000 USD
Plus Freight $150.00
Note: Please leave a daytime phone number you can be reached at, on the paypal special instructions page at checkout..
This kit will yield over 2,000 Board Feet (one foot sq by 1 inch)(@ 50 F, you can lose yeild below this. The Cartridges must be 70 -85 F before spray.
Package 2 Includes:
|
1 "FastKick" Plural Component dispensing gun |
|
20 cases of SprayMax Soythane 1.5lb density Closed Cell spray surface foam. |
Package Cost: $3000 USD
Plus Freight $250.00
Note: Please leave a daytime phone number you can be reached at, on the paypal special instructions page at checkout..
This kit will yield over 4,000 Board Feet (one foot sq by 1 inch)(@ 50 F, you can lose yield below this. The Cartridges must be 70 -85 F before spray.
Package 3 Includes:
|
1 "FastKick" Plural Component dispensing gun |
|
20 cases of SprayMax Soythane .6 lb density 70% Closed Cell spray surface foam. |
Package Cost: $3,500.00 USD
Plus Freight $250.00
Note: Please leave a daytime phone number you can be reached at, on the paypal special instructions page at checkout..
This kit will yield over 6,900 Board Feet (one foot sq by 1 inch)(@ 50 F, you can lose yield below this. The Cartridges must be 70 -85 F before spray.
Package 4 Includes:
|
1 "FastKick" Plural Component dispensing gun |
|
40 cases of SprayMax Soythane .6 lb density 70% Closed Cell spray surface foam. |
Package Cost: $6,200.00 USD
Plus Freight $375.00
Note: Please leave a daytime phone number you can be reached at, on the paypal special instructions page at checkout..
This kit will yield over 13,800 Board Feet (one foot sq by 1 inch)(@ 50 F, you can lose yield below this. The Cartridges must be 70 -85 F before spray.
Package 5 Includes:
|
1 "FastKick" Plural Component dispensing gun |
|
10 cases of SprayMax Soythane .6 lb density 70% Closed Cell spray surface foam. |
Package Cost: $2,200 USD
Plus Freight $150.00
Note: Please leave a daytime phone number you can be reached at, on the paypal special instructions page at checkout..
This kit will yield over 3,400 Board Feet (one foot sq by 1 inch)(@ 50 F, you can lose yeild below this. The Cartridges must be 70 -85 F before spray.
Additional cases of 1.5 or 3lb Foam:
1-9 - $150.00 per case
10 Cases and up $140.00 per case
__________________________________________________________________
Additional cases of .6LB Foam:
1-9 - $165.00 per case
10+ Cases and up $155.00 per case
_________________________________________________________________
We also have 3lb Density Roof (exterior) grade foam and 20lb density Architectural Foam .
Feel free to e-mail about the other density formulations, if need be as we can change to the same 20 case order with another density.
All of our Spray Foams are made from regrowable energy which means you can achieve LEEDS credit with them. Made from re-growable energy by American Farmers.
*The FastKick Gun should give you years of trouble free use, ask about our Polyureas that spray from the FastKick.
Note: This system uses an Air Compressor, you will need a ( 5hp 220V electric air compressor or 8 hp gas) 10CFM @ 100PSI : Easy set-up; quick exchange time for cartriges, very professional system with little waste. Save Time AND Money with this system.